My Account

Track Order Trade Enquiries

Your Basket

Prices you'll love!
always the best deals

Hoover 75cm Canopy Cooker Hood - Stainless Steel

SKU: HBG750X Quickfind Code: 1346365

Three different speeds to set the air flow at the correct level according your needs.

Key Features

  • For building into an 80cm canopy hood cabinet
  • 3 Speeds
  • Slider controls
  • 2 x 2W LED lights
  • Washable metal grease filter
  • B rated for energy efficiency
  • 61.2 kWh annual energy consumption
  • Dimensions (mm): H245 x W740 x D295
 

Question from Angela: Asked on 12/06/2026 Can this be ducted at the rear and not the top of the unit it will sit within?

Answer from JimsonGuzman: Answered on 12/06/2026

Hi, The Hoover HBG750X is designed for top ducting only. According to the manufacturer installation instructions, the air outlet is located on the top of the unit and must be ducted vertically through the cabinet. Rear ducting is not supported or recommended.


Thank you.

Question from Matthew: Asked on 04/03/2026 Can this be plugged in or does it need a hard wire?

Answer from JoseBacud: Answered on 05/03/2026

Hi Matthew,The Hoover 75cm Canopy Cooker Hood (HBG750X) is designed to be hard-wired directly into your mains electrical supply and does not come with a standard plug. While it is technically possible to fit a plug, the manufacturer specifies that installation should be carried out by a qualified electrician using a dedicated fused connection, making a direct mains connection the safest and most compliant method.Thanks!

Answer from JimsonGuzman: Answered on 05/03/2026

Hi, The Hoover 75?cm Canopy Cooker Hood (HBG750X) must be hard-wired to the mains with a 13?A fused spur or isolator switch and cannot be simply plugged in; installation must be done by a qualified electrician.


Thank you.

Recently viewed


Back to top