Refurbished CDA ECP102BL 100cm Curved Glass Chimney Cooker Hood Black

Grade A3 - Working condition with heavy scuffs and/or dents

Warranty included

Enjoy the peace of mind that your product is covered with a guarantee on both parts and labour.

Working condition

Rigorously tested and cleaned by expert engineers. Fully operational unless otherwise stated in the product description below.

What's included

All accessories are included unless otherwise stated in the description below.

Limited stock

Our refurbished products sell out quickly, so be quick and get a fantastic product at a fraction of the new price.

This is a graded product. A3 products have moderate exterior damage . All products are tested and are in good working order.

GRADE A3

The ECP102BL is a 100cm wide chimney hood in black with a curved smoked glass canopy from CDA.

This model has 3 speeds selected by push button controls and aluminium grease filters. There are two 20 Watt halogen lights to illuminate your hob. The motor gives you a good extraction rate of 377 cubic metres per hour, which is ideal for kitchens up to 47 cubic metres, and a relatively low noise level at 61 decibels.

As a wall-mounted extractor the ECP102BL can be installed to re-circulate the air into the kitchen or to be ducted outside. If you are choosing to re-circulate you'll need a charcoal filter and if you're ducting out you'll need a ducting kit.

Features

• Ducted or recirculating modes
• 3 speeds
• Push button control
• Aluminium grease filter
• 2 x 20 W halogen lights

Technical Specifications

• Required height over gas hob: 700 mm (min)
• Required height over electric hob: 600 mm (min)
• Outlet diameter: 150 mm
• Noise level: 61 dBA
• Extraction rate: 391 m³/hr
• Rated electrical power: 100 W
• Power supply required: 3 amps

Fitting note: Please ensure that you check the ceiling height is sufficient to allow the required clearance between the hob and extractor