Midea Comfee 18000 BTU Smart A++ Wall Mounted Split Air Conditioner with Heat Pump
The Comfee 18,000 BTU is a powerful R32 wall split built for larger rooms and open-plan spaces, with efficient year-round performance. A high-output inverter compressor delivers A++ cooling (a strong SEER of 7.1) and heat-pump warming down to −15 °C outside, while app control puts the system on your phone. Backed by the advanced engineering of the Midea Group - one of the world’s largest appliance manufacturers - it’s a well-specified fixed split air conditioner great in cooling and heating spaces a 9,000 or 12,000 BTU can’t cover. Suitable for rooms of roughly up to 50 m², subject to insulation, glazing and orientation.
Why buy me
- 18,000 BTU cooling + heat pump - 5.28 kW cooling and 5.57 kW heat-pump heating handle larger lounges, open-plan kitchens and big bedrooms all year.
- Strong A++ efficiency - SEER 7.1 in cooling (A++) and SCOP 4.0 in heating (A+); the inverter modulates output to hold temperature and trim running costs.
- Wi-Fi app control - manage temperature, mode and schedules from your smartphone and voice assistants.
- Works hard in the cold - heat-pump heating rated down to −15 °C outdoor, for genuine winter use.
- Quiet for its size - indoor sound from 26 dB(A), with a hidden LCD display that dims at night.
- Built to last outdoors - Golden Fin coated coils, self-clean on indoor and outdoor units, and gas-leak detection.
- Dehumidify & fan modes - removes excess moisture and runs as a standalone fan when cooling isn’t needed.
- Follow Me & smart diagnosis - remote-sensor temperature control and fault-code self-diagnosis simplify comfort and servicing.
- Flexible installation - pipe runs up to 30 m give installers real freedom on placement.
The details
Serious output for bigger spaces
With 5.28 kW of cooling (range 0.9–6.0 kW) and 5.57 kW of heat-pump heating (range 0.9–6.3 kW), the 18,000 BTU handles rooms a 9K or 12K would struggle in - large lounges, open-plan living and sizeable bedrooms.
Efficiency that shows on the bill
Rated A++ in cooling with a strong SEER of 7.1, and A+ in heating with an SCOP of 4.0. The inverter ramps output up and down to match demand rather than cycling on and off, so it holds temperature while keeping consumption down - with only 1 W in standby.
Control from anywhere
Wi-Fi connects the unit to the Midea app for schedules, mode changes and status checks from your phone, with voice-assistant support.
Comfort features that earn their place
Follow Me reads the temperature at the remote for more accurate control; Sleep gently adjusts the set point overnight; the vertical louvre remembers its last angle on restart; and the LCD display can be fully dimmed so it doesn’t disturb you at night.
Cleaner air, cleaner unit
Double air filtration with anti-mould and anti-mite treatment, plus self-cleaning on both the indoor and outdoor units and Golden Fin coil protection to resist corrosion outdoors. Factory refrigerant charge is 1.0 kg.
Installer-friendly pipework
A maximum pipe run of 30 m gives installers latitude on where the condenser sits. Connections are 1/4" (6.35 mm) liquid and 1/2" (12.7 mm) gas.
Sizeable outdoor unit
The condenser measures 874 × 330 × 554 mm (W×D×H) and weighs 32.7 kg.
Essential info
- Power supply: 220–240 V ~ 50 Hz, 1 Ph
- Outdoor dimensions (W×D×H): 874 × 330 × 554 mm
- Outdoor net weight: 32.7 kg
- Indoor dimensions (W×D×H): 975 × 218 × 308 mm
- Indoor net weight: 10.3 kg
- Colour: White
Specification
- Cooling capacity (rated): 5.28 kW (18,000 BTU)
- Cooling capacity (range): 0.9 – 6.0 kW
- Heating capacity (rated): 5.57 kW
- Heating capacity (range): 0.9 – 6.3 kW
- Energy class (cool / heat): A++ / A+
- SEER (cooling): 7.1
- SCOP (heating, average climate): 4.0
- EER / COP (derived from capacity ÷ input): ~3.43 / ~3.76
- Power input (cool / heat): 1.539 kW / 1.480 kW
- Annual energy (cooling): 256 kWh
- Annual energy (heating, avg.): 1,435 kWh
- Refrigerant / GWP: R32 / 675
- Factory refrigerant charge: 1.0 kg
- Compressor: DC inverter
- Dehumidification: ~2.0 l/h typical
- Indoor sound pressure: 26 – 42 dB(A)
- Indoor sound power: 55 dB(A)
- Outdoor sound pressure: 56 dB(A)
- Outdoor sound power: 61 dB(A)
- Outdoor airflow: 2,460 m³/h
- Pipe - liquid / gas: 6.35 mm (1/4") / 12.7 mm (1/2")
- Max pipe run: 30 m
- Max elevation (height difference): 10 m
- Operating range (cool / heat, outdoor): −15 to +50 °C / −15 to +30 °C
- Power supply: 220–240 V ~ 50 Hz, 1 Ph
- Wi-Fi: yes
- Remote control: Included
- Smart features: App control, Follow Me, smart diagnosis, sleep, self-clean, gas-leak detection, louvre memory, 1 W standby
- Colour: White
Installation & Compliance
F-Gas: This unit contains R32 refrigerant (factory charge 1.0 kg) and must be installed and commissioned by an F-Gas certified engineer.
Downloads
