Classically designed to fit seamlessly within every kitchen décor whether modern, traditional or contemporary – the Hotpoint Built-In Gas Hob (PAN 6442 IX/H) in stainless steel delivers exceptional cooking power to your home. With four burners, one with rapid heat, two of which are semi-rapid – this model offers versatility and fully adaptable temperature control, with an automatic ignition for safety. Sturdy Enamel Supports hold your pans firmly, giving your peace of mind as well as an easy-to-clean foundation.
Key Features
- 4 burners
- Control Type: Dial
- Automatic ignition
- Enamelled pan supports
- Flame failure safety device
- LPG convertible
- Dimensions: H 33 x W 580 x D 510mm
- Cut-out dimensions: W 560 x D 480mm
Question from Kenny: Asked on 15/07/2026 I have a Moffat gas hob58x50 will this hob fit the same
Hi, The Hotpoint PAN642IXH measures 580mm wide x 510mm deep, with a required cut-out size of approximately 560mm x 480mm. If your Moffat hob is 58cm x 50cm externally, it may be a suitable replacement, but we recommend checking the existing worktop cut-out size to confirm it will fit.
Thank you.
Question from Rachael: Asked on 26/03/2026 Does this hob come with the lpg conversion kit included?
Hi, The Hotpoint PAN642IXH 58cm 4-burner gas hob is LPG convertible, but it does not come with an LPG conversion kit included. If you need to use it with LPG, a separate conversion kit will need to be purchased and fitted by a Gas Safe registered engineer.
Thank you.
Question from Janet: Asked on 11/03/2026 Will this hob fit my Hotpoint oven Ref.R011800804090
Hi, The Hotpoint 58cm 4 Burner Gas Hob (PAN642IXH) will fit above your Hotpoint oven, as hobs are installed in the kitchen worktop rather than inside the oven itself, so the oven model does not affect compatibility. The worktop cut-out required for this hob is approximately 560?mm wide × 480?mm deep. If your existing hob fits a similar cut-out, this model will fit perfectly. Installation must be carried out by a Gas Safe engineer to ensure the gas connection is safe and compliant.
Thank you.
Question from Ciaran: Asked on 21/10/2025 Hi there,
I'm interested in purchasing this hob, just wanted to know what connection it has to gas pipework and which side the connection is at back of hob ?
Thank you
Hi Ciaran,The Hotpoint PAN642IXH 4-burner gas hob connects to the gas supply via a centrally positioned threaded G 1/2 male fitting at the back of the appliance, compatible with both flexible and rigid gas hoses. For safety and proper installation, all gas connections should be carried out by a qualified Gas Safe registered engineer.Thanks!