Product Information
This stylish 90cm Cooker Hood from electriQ is sleek and slimline, adding a modern touch to your kitchen. With a powerful 279m³/h extraction rate, it quickly removes unwanted cooking odours and steam from the air and is ideal for large sized kitchens. The A++ energy rating means this hood operates efficiently and helps to keep energy costs low. The simple touch controls allow you to adjust fan speeds easily, and the two LED lights provide bright, energy-efficient lighting for your cooking area. Additionally, this hood features an automatic function where it can detect the heat coming from your cooking through thermal sensors, and it will automatically adjust itself to the fan speed required. We’ve also included an air cleaning function, which will continue cleaning your air for an hour after you have finished cooking.
Automatic Function
Auto Mode will monitor heat with real-time thermal sensing and automatically adjust the extraction levels to suit what's cooking. This function can be used in standby mode to have the cooker hood activate as soon as you start cooking and then automatically stop again if no heat is detected for 3 minutes.
Air Cleaning Mode
The unit will operate at a low speed for 5 minutes, then power down for 55 minutes. This cycle will repeat each hour until deactivated
Essential Info
- Fan Speeds: 3 plus 2 boost settings
- Lighting: 2x 1.5w LED lights
- Extraction Rate: 279m³/h
- Booster Extraction Rate: 620m³/h
- Max Noise Level: 48 dB
- Energy Rating: A++
- Dimensions: H 500mm x W 900mm x D 505mm
- Voltage: 220-240V
- Frequency: 50/60 Hz
- Air Outlet Diameter: 150mm
- Plug Type: 13A Plug
More Info
- Extendable chimney section to fit different kitchen heights
- Can be installed to recirculate or extract the air
- Unbranded design coordinates with any kitchen appliance
- Grease Filter: eiQGFA40007x3 / included (dishwasher-safe at 60°C)
- Carbon filter: eiQCFA20061 (set of 2) sold separately (required for recirculation mode)
- Note: Some cooker hoods come with a blue protective film; please remove it before installation.